A truck is down, the part isn't on the shelf, and the next delivery is three days out. That's a stockout — and it almost always traces back to one number set wrong: the reorder point. Set it too low and trucks wait; too high and cash sits on a shelf gathering dust. This guide shows how to calculate it, the safety stock behind it, and which parts even deserve one. Start free and set a reorder point on every part.
Truck Parts Inventory Management: Reorder Points & Stock Control
What a Reorder Point Actually Is
A reorder point is the stock level that triggers a new order — set so the part arrives just as the last units run out. It has two jobs rolled into one number: cover what you'll use while you wait for delivery, plus a buffer for the days demand or delivery runs long.
How many you'll use between placing the order and the part arriving. This is the part you can't avoid buying — it just covers the wait.
A buffer for when usage spikes or the supplier is late. High for critical parts, minimal or zero for cheap consumables.
Work a Real Example
The math is simpler than it looks. Take one part, count how often it was used last year, divide by 365, and multiply by the real lead time.
When stock falls to four, a new order goes out. By the time you're down to the safety-stock buffer, the delivery is already arriving. Book a demo to see reorder points calculated out of your own usage history.
Not Every Part Deserves the Same Treatment
Before you set a single reorder point, sort the catalog. A small slice of parts ties up most of the money, and they should never be managed the same way as a bin of clamps. ABC analysis splits them by annual spend.
Match the Method to the Part
Spend is only half the picture. The other half is whether a part is critical — does a truck stop without it — and whether its demand is predictable. Those two questions pick the stocking method.
truck stops without it Min-max / Kanbanoil filters, brake pads, belts Safety stock bufferinjectors, ECMs, turbos
truck keeps running JIT / bulk consumablefasteners, clamps, wipers Vendor-managed / on-demandbody panels, mirrors
Reorder Points That Set Themselves
Truck Inspection & Maintenance Management Software watches usage on every part, calculates the reorder point on real history and real lead times, and flags a part the moment it falls to its trigger — so the order goes out before a truck ever waits on a shelf.
The Hidden Cost on Both Sides
Stock control is a balance between two expensive mistakes. Too little stock grounds trucks; too much ties up cash and quietly rots on the shelf. Good reorder points keep you off both edges.
- Downtime runs $500–$2,000 per hour
- Expedited shipping costs 2–4× list price
- A truck sits waiting on one part
- Carrying cost runs 20–30% of value per year
- 5–15% of a catalog is typically dead stock
- Dead = no movement in 12 months
The Shelf Should Be Ready Before the Truck Is Down
A reorder point is only as good as the usage data behind it. Truck Inspection & Maintenance Management Software ties every part to the work orders that consume it, so the trigger reflects what your fleet actually uses — not a guess.
Why Fleets Run Reorder Points in Software
A spreadsheet reorder point is right the day you set it and wrong a month later, as usage and lead times drift. Software keeps the number live and current. Start free and let every part reorder itself on time.
Frequently Asked Questions
Stop Guessing When to Reorder
Set a reorder point on every part using real usage and real lead times, buffer the critical ones, and let the order go out before a truck ever waits on an empty shelf.







