Most fleets don't pick the wrong software on price — they pick it on a demo, then find the gaps on a real truck. In the 2025 International Roadcheck, 18.1% of inspected vehicles were placed out of service, and brakes and tires led the list. This checklist gives you 24 questions to test any fleet maintenance system before you commit. Start free and test it on your own trucks.
Inspect · Maintain · Repair · Prove
Best Fleet Maintenance Software 2027: Top Features & Buyer's Checklist
A good system closes the loop from driver inspection to finished repair to audit-ready record. Truck Inspection & Maintenance Management Software is built around that loop — use the checklist below to see what to demand from any vendor, including us.
18.1%of vehicles placed out of service, 2025 Roadcheck
41%of those violations were brake-related
21%were tire violations
The Four Jobs Your Software Must Do
Skip the feature count. Every capability on a vendor's list should serve one of four jobs, and a gap in any one shows up later as a missed service or a missing record.
1InspectCapture driver defects the moment they happen
2MaintainTrigger services before they are due
3RepairTurn every defect into a tracked, closed work order
4ProveProduce any truck's record on demand
The Buyer's Checklist — 24 Questions to Ask
Tick each item as you test a vendor. Real trucks, real drivers, real work orders — not a rehearsed demo. Contact our team to walk through it against your own fleet.
How to read your score
20–24Strong fit — run a pilot on a few trucks
14–19Partial fit — ask the vendor about each gap in writing
Under 14Keep looking — gaps this wide get expensive later
Built Around the Inspection-to-Repair Loop
Truck Inspection & Maintenance Management Software ties each inspection, DVIR, and repair to its truck, attaches the retention clock, and keeps the file reachable from any yard. Run sections 01, 03, and 05 of this checklist against it on your own trucks — free for up to 3.
Four Red Flags During a Demo
Watch for these before you sign. Any one of them usually means extra work lands on your team after launch. Start free and see how a real workflow feels.
The demo uses sample data onlyAsk to see your own truck types and PM intervals.
Defects and repairs live in separate placesIf they don't link, records will have gaps.
Retention is "your job"You still track clocks in a spreadsheet.
No clear exitData export should be easy, not a support ticket.
Frequently Asked Questions
What is the difference between fleet maintenance software and a CMMS?
A general CMMS manages work orders and preventive maintenance for any asset. Fleet maintenance software does the same for trucks and adds vehicle-specific pieces such as driver DVIRs, mileage and engine-hour triggers, and annual inspection tracking.
Which features matter most for a small fleet?
How should I compare pricing between vendors?
Compare the total cost per truck per month, not the headline rate. Ask what is included for setup, support, reports, and extra users, and whether the price stays clear as you add trucks. A free trial on real trucks is the safest way to confirm the numbers before you commit.
How long should a pilot run?
Long enough to see one full cycle: a driver inspection, a defect, a repair, and the finished record. For most fleets that is a few weeks on a handful of trucks.
Inspect · Maintain · Repair · Prove
Test the Loop on Your Own Trucks
Truck Inspection & Maintenance Management Software ties each inspection, DVIR, and repair to its truck and keeps the whole file reachable from any yard. Try it free, then score it against the checklist.
No credit card required. Free for up to 3 trucks. Built for FMCSA-compliant fleets.
Vehicle out-of-service figures from CVSA's 2025 International Roadcheck (56,178 vehicle inspections), as reported by Fleet Maintenance magazine. The score bands are our own guidance, not an industry standard.