A preventive maintenance schedule only works if every truck knows its next service before it is due. Most fleets have intervals on paper, but the paper doesn't warn anyone when a tractor is 1,000 miles from an overdue oil change. This guide shows how to build a fleet PM schedule by mileage: layered service tiers, a sample mileage track, duty-cycle adjustments and due windows, plus how one inspection-to-PM workflow keeps it running. Start free and build your PM schedule today.

PM Schedule · Mileage Intervals · Due Windows

Fleet Preventive Maintenance Schedule: Mileage Intervals & Service Due Windows

A schedule that lives in a spreadsheet gets checked when someone remembers. Trucks keep driving, and services slip past their intervals unnoticed.
Truck Inspection & Maintenance Management Software puts your PM intervals, driver inspection findings and work orders in one workflow, so each truck's next service is always visible.
1Set intervalsPM tiers and due windows per truck
2InspectDriver DVIRs surface defects between PMs
3Work orderBundle the PM with open defects
4RecordService history stays with each truck
No credit card required. Free for up to 3 trucks.

The Service Ladder: Layer Your PM Tiers

Most fleets don't run one PM. They run a ladder, where each tier repeats the work below it and adds more. This keeps short, cheap services frequent and big services planned.

C
Major serviceEverything in A and B, plus deeper checks such as coolant, transmission and differential service as the manufacturer specifies
B
Intermediate serviceEverything in A, plus fuel filters, air system checks and a closer look at brakes and suspension
A
Basic serviceOil and filter change, chassis lube, fluid levels and a walk-around inspection
Tier contents are examples. Build yours from the engine, transmission and axle manufacturers' guidance.

A Sample Mileage Track

Here is how the tiers land on a truck over time, using an illustrative 15,000-mile base interval. Every stop gets an A, but larger tiers replace it at multiples.

Illustrative schedule: base interval 15,000 miles
A15,000
B30,000
A45,000
C60,000
A75,000
B90,000
A105,000
C120,000
In TIMEach truck carries its own PM schedule, so a high-mileage tractor and a local delivery unit can run different intervals without a separate spreadsheet.

Mileage Is Not the Only Clock

Miles alone miss trucks that idle, run short routes or sit. A solid schedule uses whichever trigger comes first.

MIMileageBest for line-haul and regional trucks with steady road miles.
HREngine hoursBest for heavy idle, PTO use and vocational trucks where miles undercount wear.
CALCalendar timeA backstop for low-use units. Fluids age even when the truck barely moves.

Adjust the Interval for How the Truck Works

The same truck model can need different intervals in different jobs. Harder duty means shorter intervals, always within manufacturer limits.

Steady highway line-haul
Longest interval
Regional mixed routes
Standard interval
Local, stop-and-go
Shorter interval
Severe duty, dust, heavy idle
Shortest interval
Relative comparison only. Use your manufacturer's severe-service guidance and your own service history.

Add a Due Window Around Every Interval

An interval is a target. A due window turns it into a range you can plan around, with an early side for booking a bay and a small late side for real-world slips.

Early windowBook the bay now
DueOn target
Late windowShort grace
OverdueOut of tolerance

Keep the late side smaller than the early side, and track how many services land inside the window each month. That one number shows whether your schedule is working. Book a demo to see PM status across your fleet.

Build Your Schedule in Five Steps

1
List every unit and its dutyGroup trucks by how they run: line-haul, regional, local or severe.
2
Pull manufacturer intervalsEngine, transmission, axle and warranty requirements set your upper limit.
3
Define A, B and C tiersWrite what each tier includes so every shop does the same work.
4
Set windows and triggersChoose early and late ranges and add engine-hour or calendar backstops.
5
Review with real dataCheck service history each quarter and tune intervals where records show a pattern.
In TIMDefects logged on a driver DVIR become work orders, so the PM visit can cover them too and the repair stays in the truck's history.

Schedule Mistakes That Cause Surprise Breakdowns

✕
One interval for every truckDuty cycle changes wear, so a single number fits no one well.
✕
Ignoring DVIR findingsDefects reported between PMs get lost if they never reach a work order.
✕
Stale odometer dataA schedule is only as accurate as the mileage behind it.
✕
No review loopIntervals set once and never checked drift away from reality.

FMCSA requires motor carriers to systematically inspect, repair and maintain their vehicles and keep records, but it does not set your PM mileage interval. Your schedule is your policy, so write it down and follow it. Start free and put your PM policy into the system.

Know Every Truck's Next Service at a Glance

Set intervals and windows once, then pair each PM with the defects drivers have already reported.

Frequently Asked Questions

How often should a fleet truck get preventive maintenance?
It depends on the engine, the duty cycle and the manufacturer's guidance. Many fleets run a basic service at a fixed mileage interval with larger services at multiples of it. Harder duty calls for shorter intervals. Book a demo to map intervals to your fleet.
Should I schedule PM by mileage, engine hours or time?
Use mileage for steady road trucks, engine hours for idle-heavy or PTO units, and calendar time as a backstop. Trigger the service on whichever comes first.
What is a PM due window?
It is the range around the due point in which a service still counts as on time. It usually has a larger early side for scheduling and a smaller late side for grace.
Does FMCSA require a specific PM interval?
No. FMCSA requires a systematic maintenance program and records, but you set the intervals from manufacturer guidance and your operation. Start free to track your schedule and history.
Planned services · Fewer surprises · Clean records

Turn Your PM Schedule Into a Routine

Set the intervals, watch trucks enter their window and close every PM with the defects found along the way, all in one workflow.

No credit card required. Free for up to 3 trucks.